Qty Discounts Off Price
* Discounts may vary based on options above
Click here to download
BEM105 Operation Manual
Controller Software Customization
Click here to find more details of software customization
Click here to download
CH relay output
Ping and Programmable Reboot (x4 independent monitor channels)
Http Web Control
Encrypted Communication over Internet
Firmware update over Internet
RealTime Online Support Service Chat
Configurable Ethernet Parameters
devices such as pumps, valves, motors, coils, etc. over the web or a
electronic door locks and garage door openers
Remotely reboot computers, servers, etc
Output Electric Specifications
Relays have Normally Open (NO) and
Normally Closed (NC) Contacts each capable of switching max:
Supply Electric Specifications
DC 5 - 24V / 200mA power supply (wide range input)
Industrial ( -30°C to +80°C)
mm / 75 mm / 20 mm
IP address: 192.168.1.105
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
Communication Bus: Ethernet
Control Protocol 1:
Control Protocol 2: Http
Control Protocol 3: Modbus/TCP
Control Protocol 4: Internet (Android App)
What is Auto Ping and Programmable Reboot?
Auto Ping function is an monitor, or watchdog, for your third party network
When auto ping function is enabled, BE-M105 will automatically send ping command
other device. When the external device becomes unresponsive, BE-M105 will run a
preloaded program, which can be set by your customized reboot sequence. You can
either set a
fixed IP address or a domain name for auto ping.
What is Easy Bus?
Easy Bus is an
innovative control bus, which not working with
address and registers, but rather
work with easier understanding format.
For example, to
switch on/off channel 1, you may directly send
ASCII words "k01
= 1" or "k01 = 0" to
BE-M105. This is extremely easy to use.
What is X-Connect?
X-Connect is a P2P connection function from modules to modules.
With X-Connect you can map any input channel in a network to any output channel.
For example, you can map BEM107 input channel 1 to BEM104 output channel 2, you can also map one BEM107 input channel to 2 BEM104 channels.
If you click a button connected BEM107 input channel, you can trigger up to 8 outputs at different modules and different channels.
Item 1: LabVIEW EASYBUS-TCP, Source Code
User Operation Manual
Customized Design & Technical Support
you have technical questions or customized design requirement,
please contact us to get support from our engineers team.
may send your information to Email: email@example.com
Scan barcode to make a test!