LSM303DLH 3-Axis Electronic Compass Accelerometer Module Compass

  

LSM303DLH Digital Three Axial Acceleration And Magnetic Field Sensor Module 
 

.LSM303DLH introduction
The LSM303DLH is a system-in package featuring a 3D digital linear acceleration sensor and 3D digital magnetic sensor.

The LSM303DLH has a linear acceleration full-scale of ±2 g /±4 g /±8 g /±16 g and a magnetic field full-scale of 1.3 /     /±2.5±1.9±2.5±4.7±5.6 /±5.6 gauss.

The LSM303DLH includes a I2C serial bus interface that supports standard mode(100KHz) and fast mode(400KHz).The system can be configured to generate an interrupt signal by inertial wakeup/free-fall events, as well as by the position of the device itself. Thresholds and timing of interrupt generators are programmable on the fly by the end user. Magnetic and accelerometer parts can be enabled or put in power-down mode separately.

The LSM303DLH is available in a plastic land grid array(LGA) package, and is guaranteed to operate over an extended temperature range from -40°C to + 85°C.

2.Feature
1).3 magnetic field channels and 3 acceleration channels.
2).±1.3 to ±8.1, gauss magnetic field full-scale.
3).±2 g /±4 g /±8 g /±16 g linear acceleration.
4).16-bit data out.
5). I2C serial interface.
6).Analog supply voltage: 2.16V to 3.6V.
7).Power saving mode and low power consumption mode
8).Two independent programmable interrupt generators for free-fall and motion detection
9).Embedded self-test
10).Embedded FIFO
11).6D / 4D-orientation detection
12).ECOPACK®RoHS and “Green”compatible

13).Parameter
.Supply voltage:3V-5V
.Interface: IIC
.Size: 23.4mm*23mm

14).Mounting hole diameter: φ3
15).Mounting hole size: 17.5m*17.5m